Eval » Historie » Revision 4
Revision 3 (Maximilian Seesslen, 01.12.2025 14:24) → Revision 4/10 (Maximilian Seesslen, 01.12.2025 14:39)
h1. Eval
Pairs of Switch-output and PWM can be targets.
List of alarms with actions. Time, Target + values.
E.g.
08:00: Sleeping room ambient light on; 90% 100%
16:00: Plant lamp 1 On
16:30: Plant lamp 1 Off
17:00: Plant lamp 1 On
17:30: Plant lamp 1 Off
18:00: Plant lamp 1 On
18:30: Plant lamp 1 Off
Device knows the reason of the wake.
It also has five 32-bit backup registers. They can be used to track the reason for waking up.
Test mode wakes device now+10 secods instead of real alarm time.
h2. Standby
Device may not shut down when alarm is ongoing. It can use wakeup from RTC.
h2. Log code history
Store logs e.g. when there was no external power available.
h2. Adhoc alarm
Queues durations with start timers.
Pairs of Switch-output and PWM can be targets.
List of alarms with actions. Time, Target + values.
E.g.
08:00: Sleeping room ambient light on; 90% 100%
16:00: Plant lamp 1 On
16:30: Plant lamp 1 Off
17:00: Plant lamp 1 On
17:30: Plant lamp 1 Off
18:00: Plant lamp 1 On
18:30: Plant lamp 1 Off
Device knows the reason of the wake.
It also has five 32-bit backup registers. They can be used to track the reason for waking up.
Test mode wakes device now+10 secods instead of real alarm time.
h2. Standby
Device may not shut down when alarm is ongoing. It can use wakeup from RTC.
h2. Log code history
Store logs e.g. when there was no external power available.
h2. Adhoc alarm
Queues durations with start timers.