Eval-HW » Historie » Version 21
Maximilian Seesslen, 13.06.2023 14:14
| 1 | 1 | Redmine Admin | h1. Eval |
|---|---|---|---|
| 2 | |||
| 3 | h2. Funk |
||
| 4 | |||
| 5 | 6 | Redmine Admin | Ordered RFM69CW-868S2 x8; je 3.70Euro |
| 6 | 1 | Redmine Admin | |
| 7 | https://www.hoperf.com/modules/rf_transceiver/RFM69C.html |
||
| 8 | 16 | Maximilian Seesslen | https://www.hoperf.com/data/upload/portal/20190307/RFM69CW-V1.1.pdf |
| 9 | 14 | Maximilian Seesslen | 2x7 pins, 2mm pitch, 13,6mm horizontal pitch |
| 10 | 6 | Redmine Admin | |
| 11 | 19 | Maximilian Seesslen | Packet mode is already recommended. |
| 12 | 20 | Maximilian Seesslen | With AES there are still max 64 Bytes for transfer. (Not enough for CAN-FD) |
| 13 | 19 | Maximilian Seesslen | |
| 14 | 6 | Redmine Admin | h2. MCU |
| 15 | |||
| 16 | STM32F373C8T6; 4,75€ |
||
| 17 | 7 | Redmine Admin | Cortex-M4 etwas overkill; 64 KB, LQFP-48 |
| 18 | Gibt gerade nichts anderes. |
||
| 19 | 5 | Redmine Admin | |
| 20 | 9 | Redmine Admin | STM32G441KBT6; 5,45€ |
| 21 | Cortex-M4F etwas overkill; 128 KB, LQFP-32 |
||
| 22 | |||
| 23 | 11 | Redmine Admin | STM32F072C8T6; 4,38€ |
| 24 | Cortex-M0; 64KB, LQFP-48 |
||
| 25 | 1 | Redmine Admin | |
| 26 | 21 | Maximilian Seesslen | STM32F042C6T6; would be perfect; 2.5984€ bei 25 Stk; schoen waers |
| 27 | 12 | Redmine Admin | |
| 28 | 5 | Redmine Admin | Small as possible with CAN. STM32F042 not available. |
| 29 | 10 | Redmine Admin | What did i get from farnell? STM32F103? STM32L433CCU6; ARM Cortex-M4, 80MHz, 256KB |
| 30 | 5 | Redmine Admin | |
| 31 | * SPI 4 |
||
| 32 | * 5xGPIO Signals |
||
| 33 | * CAN 2 |
||
| 34 | * 2xLED RX/TX |
||
| 35 | 8 | Redmine Admin | * 2xLED HB/User |
| 36 | 1 | Redmine Admin | * UART 2 |
| 37 | 8 | Redmine Admin | * SWD 3 |
| 38 | --------- |
||
| 39 | 20 |
||
| 40 | 15 | Maximilian Seesslen | |
| 41 | STM32F103C6U6A, would be ok, just to get rid of them |
||
| 42 | 18 | Maximilian Seesslen | 32kByte Flash; 10kByte RAM; 72Mhz; VFQFPN-48 |
| 43 | Quite big. |